Quick Set Mode Items - Icom IC-718 Instruction Manual

8
SET MODE

Quick set mode items

• RF power
This item adjusts the RF output power. The RF output
power can be adjusted from L, 1 to 99 and H for indication,
however, it can be adjusted continuously.
•The default is H (maximum power).
Note that while adjusting the output power, the power meter
is displayed automatically.
• Mic gain
This item adjusts microphone gain from 0 to 99 and H for
indication, however, it can be adjusted continuously.
The default is 50.
• VOX gain
This item adjusts the VOX gain for the VOX (voice activated
transmit) function.
The default is 50.
• VOX delay
This item adjusts VOX (voice activated transmit) delay time.
The delay time can be adjusted from 0 to 2 sec. in 0.1 sec.
units.
The default is 10 (1.0 sec).
• Anti VOX level
This item adjusts the ANTI-VOX gain for the VOX (voice ac-
tivated transmit).
The default is 50.
• CW pitch
This item adjusts CW pitch. CW pitch is adjustable from
300 Hz to 900 Hz in 10 Hz steps.
The default is 60 (600 Hz).
• BK-IN
This item selects break-in type for CW operation. There are
three selectable values:
oFF: No break-in operation available (default).
SE : Semi break-in operation available.
FL : Full break-in operation available
.
42