Table of Contents
Advertisement
PARTS SUPPLIED
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
z
contact the dealer or retailer you bought the product from to report the damage.
Fisher & Paykel is not responsible for shipping damage.
z
Supplied
Moisture protection
Side mounting bracket
kits (2)*
tape (1)
Rubber washer (1)**
Drain hose support (1)
Wire clip (1)
Clamp (1)
*Optional | **Comes fitted to the product
TOOLS AND COMPONENTS
5/8" 16mm Phillips screws
1 1/2" 38mm bottom fixing
(16)
screws and washers (2)
Drain hose joiner (1)
Panel bracket kits (1)**
External venting kit (1)
Trim bracket
TOOLS REQUIRED
Not supplied
Flat-blade screwdriver
Powered driver
Level
Pliers
INSTALL VIDEO
This video provides an overview of what is needed to install a DishDrawer™ Dishwasher. It is
intended as an overview only of the installation process and is not intended to be used as a
standalone guide on how to install a DishDrawer™ Dishwasher yourself. Installation should be
undertaken by a Fisher & Paykel trained and supported service technician or qualified person.
To access installation videos
Scan the QR code with your smartphone or watch online at:
fisherpaykel.com/dishdrawer-install
Box cutter
Pencil
Phillips screwdriver
5
Advertisement
Table of Contents
