Standard Install - Fisher & Paykel SINGLE DISHDRAWER DD24STX6I Installation Manual

STANDARD INSTALL

C
A
D
B
CABINETRY DIMENSIONS
A Minimum inside height
B Inside width
C Minimum inside depth*
D Minimum toe kick height**
*including 11/16" (18mm) door panels on adjacent cabinetry
**when venting through the same or adjacent cabinet. Refer to 'External venting preparation' for more information.
***for more information on service requirements, refer to 'Plumbing & electrical considerations' and 'Cabinetry preparation'.
8
Connections can
be located in an
adjacent cabinet
on either side of
the DishDrawer™
Dishwasher***
ISOMETRIC
INCHES
17 15/16
23 5/8
22 3/4
3 15/16
CABINETRY
The assisted opening unit should be installed at the centre front of the cavity. For more
information on assisted opening installations, refer to fisherpaykel.com
B
A
E
MM CABINETRY DIMENSIONS
456 A Minimum inside height*
600 B Minimum inside height from top of spacer blocks
578
C Inside width
100
D Minimum inside depth**
E Minimum toe kick height***
*including an 11/16" (18mm) high spacer and two 2 3/16" (55mm) high spacer blocks
**including 11/16" (18mm) door panels on adjacent cabinetry
***when venting through the same or adjacent cabinet. Refer to 'External venting preparation' for more information.
****for more information on service requirements, refer to 'Plumbing & electrical considerations' and 'Cabinetry preparation'.
ASSISTED OPENING INSTALL
D
C
ISOMETRIC
Assisted opening units can be purchased separately.
Connections can
be located in an
adjacent cabinet
on either side of
the DishDrawer™
Dishwasher****
INCHES MM
20 1/8 511
17 15/16 456
23 5/8 600
22 3/4 578
3 15/16 100