Fisher & Paykel OR36SCG User Manual page 35

WHAT?
HOW?
HOW OFTEN?
COOKTOP PARTS
Burner caps 1 Check that the burner is turned
and flame
2 Lift off the burner cap and brass
spreaders
3 Wash them in hot soapy water,
●
4 Replace the flame spreader and
Ignitors 1 Check that the burner is turned
2 Clean the ignitor with a small brush
Burner grates 1 Wait until the grates have cooled
2 Carefully lift the grates off the
3 To remove stubborn stains, soak
4 Wash in a mixture of hot water and
●
Wok ring 1 To remove stubborn stains, soak
2 Wash in a mixture of hot water and
●
CARE AND CLEANING
OFF and allow it to cool.
flame spreader.
rinse, and dry.
Use a stiff nylon brush or straight-
●
ended paper clip to clear the
notches of the flame spreader.
burner cap correctly. See 'Replacing
the burner parts'.
OFF.
(e.g. old toothbrush) or cotton swab
that has been dipped into rubbing
alcohol.
completely.
cooktop and place them on a
protected surface.
the grates in a mixture of clothes
washing detergent and water.
dishwashing liquid, then rinse and
allow to dry.
The grates are also dishwasher safe.
●
the grates in a mixture of clothes
washing detergent and water.
dishwashing liquid, then rinse and
allow to dry.
The wok ring is also dishwasher-
●
safe.
IMPORTANT!
Keep the notches of
● ●
the flame spreaders
clear. Soiling may clog
these and cause ignition
problems.
Before replacing the
● ●
burner parts, check that
they are dry. Wet burner
parts may result in an
irregular flame.
Before lighting a burner
● ●
you have reassembled,
check that all of its parts
are positioned correctly.
Incorrect assembly can
cause dangerous irregular
flames and ignition
problems.
Do not put burner parts
● ●
in the dishwasher as they
will become discolored.
The ignitors must be
● ●
kept clean and dry to
work correctly. Dirty or
wet ignitors could cause
constant clicking and
sparking, even if a flame
is present.
Take care, the grates are
● ●
heavy.
Make sure you place a
● ●
dish towel or other soft
cover on the surface
before putting a grate
on it.
33