Fisher & Paykel OR36SCG User Manual page 13

To insert the shelves
Guard rail
1 Make sure the guard rail is at the
back, facing up and the slides are not
extended.
3
3 Hook the rear tags over the wires of the
desired shelf position on both side racks.
To remove the shelves
1 Wait for the oven to cool down completely.
2 Hold the shelf firmly with both hands, making sure you grip both the wire shelf and the
safety stop below it to stop the shelf sliding foward.
3 Pull the shelf forward about ¾ of the way.
4 Lift the rear of the shelf slightly so that the tags clear the side rack wires, then remove.
OVEN USE
2 Hold the shelf firmly with both hands,
making sure you grip the wire shelf too
to stop it sliding forward.
4
4 Push the shelf all the way into the oven,
ensuring the front and rear tags either
side are securely locked behind the side
rack wires.
11