For ease of access to the filter, lift the trap door. Refer to 'Racking features' for details.
Removing and cleaning the filter
1
filter cap
2
filter base
Replacing the filter
1
2
MAINTENANCE
Twist the filter anti-clockwise until the arrow
in the tub points to
to remove.
Separate the filter cap from the filter base
by pressing the release button and lifting.
Do not attempt to remove the filter by
force as this may cause damage.
Clean under hot soapy water and
rinse thoroughly.
Align the filter cap with the notch on the
filter base. Click together to secure.
Place the filter back into the tub by aligning
the arrow to the
clockwise until the arrow aligns with
clicks into position.
If not aligned correctly, draining performance
may be reduced.
on the filter. Lift
on the filter. Rotate
and
33