Machine Parameters Screen (Technical Set-Up, Hidden Screen) - Zamboni FastICE DK - 11000 Operating Manual

Operating Manual

Machine Parameters Screen (Technical Set-up, Hidden Screen)

The Machine Parameters Screen is used for factory set-up and tuning of the control system. It is accessible
only when the display is on the Set-up Screen and the Function key is held for a 5-second interval and
released.
Once accessed, the technician may adjust any of the control parameters using the encoder knob to select
the desired parameter - rotate the knob to move the red highlighted box to the desired parameter, press
the encoder knob to make the selection (highlighting around the box will change to white), rotate the
knob to change the highlighted value and press the encoder knob to enter the new value.
Box highlighting will change back to red after entering the new value and rotating the knob will move the
box to the next parameter.
Exit the Machine Parameters screen by pressing the Home key (returns to the Dashboard screen).
Zamboni FastICE ® Operating Manual
DK - 11000 Page 20 of 44