Set-Up Screen; Diagnostics Screen - Zamboni FastICE DK - 11000 Operating Manual

Operating Manual

Set-up Screen

The Set-up Screen allows the operator to select or set operational parameters of the control system. The
operator will use the encoder knob to select the desired parameter - rotate the knob to move the red
highlighted box to the desired parameter, press the encoder knob to make the selection (highlighting
around the box will change to white), rotate the knob to change the highlighted value and press the
encoder knob to enter the new value. Box highlighting will change back to red after entering the new
value. Rotating the knob will move the highlighted box to another parameter.

Diagnostics Screen

The Diagnostics Screen provides a read-out of the current state of the solenoid valves, communication
status (between the display and machine controller), supply voltage, display software version and controller
software version. The Diagnostics Screen will display the status of the hydraulic valve coil and the three
water valve coils regardless of whether or not the system is in use. Supply voltage will also be monitored
for troubleshooting purposes.
Zamboni FastICE ® Operating Manual
DK - 11000 Page 19 of 44