Table of Contents
Advertisement
•
Average Spray Thickness
•
Average Ground Speed (calculated only when one or more nozzles are active)
•
Average Water Temperature – average ice-making water temperature
And active fields to:
•
Reset Summary Statistics – this button is the only means of resetting the summary information.
•
Download Summary
The SET-UP screen will display and allow selection of (using encoder knob):
•
Units of Measure selection – US or Metric
•
Spray thickness - US = Inches, Metric = mm
•
Ground speed - US = MPH, Metric = km/h
•
Water Flow – US = GPM, Metric = L/min
•
Water Used – US = Gallons, Metric = Liters
•
Upper Boom Shut-off Speed
The DIAGNOSTICS screen will display (passive read-out only):
•
Hydraulic Valve Status – coil fault indication – open / short / okay
•
Communication Status – okay or display to controller communication fault
•
Supply Voltage (VDC) – system voltage
•
Upper Boom Valve Status – coil fault indication – open / short / OK
•
Lower Boom Valve Status – coil fault indication – open / short / OK
•
Board Spray Valve Status – coil fault indication – open / short / OK
•
Display Software Version
•
Controller Software Version
The HIDDEN screen may be accessed only from the Set-Up screen and when the Function key is pressed for
5-seconds and released. When active, it will display and allow selection (using encoder knob) of:
Zamboni FastICE
®
Operating Manual
DK - 11000
Operating Manual
Page 13 of 44
Advertisement
Table of Contents
