Hart InterCivic Verity Scan Polling Place Field Manual page 44

voting with Touch Writer
44
3. The voter selects whether to use the screen, audio, or both to complete
their ballot, and then adjusts their audio and/or screen settings.
If the voter chooses to use both the screen and audio, they will then be walked
•
through the audio settings and screen settings before proceeding. The voter
selects OK, it sounds good/OK, it looks good in the bottom right to proceed.
If the voter chooses to use the screen only and
•
turn off the audio, they will be asked to confirm
before proceeding, by selecting Yes, turn it off.
The voter will then be walked through the screen
settings before proceeding. The voter selects OK,
it looks good in the bottom right to proceed.
If the voter chooses to use the audio only, they will
•
be asked to confirm before proceeding, by
selecting Yes, turn it off. The voter will proceed
through their ballot using the Access device with
headphones. The voter can select Touch here to
enable the screen to turn the screen display on at
any time.
4. The voter is presented with three screens of
instructions that orient them to the Touch Writer
device. The voter can select Next to view each
instructional page, or select Skip Instructions to
go to their ballot.
On the last page of instructions, the voter selects
•
Start in the bottom right to begin marking their
ballot.
The Language (if applicable), Audio, and Screen
•
settings and the Help button are also available
(see page 48).
