Hart InterCivic Verity Scan Polling Place Field Manual page 10

setting up Verity Scan
10
6. Plug the power cord into the power brick, and then plug the power brick
into the back of the Verity Scan (flat side up).
IMPORTANT: Do not plug the power cord into the wall yet.
7. Open the Verity Scan case and lock
Log the yellow beaded seal number on your Security Log - AM. Open the Verity Scan
the lid brace in place.
case and lock the lid brace in place
IMPORTANT: Never tilt a device
up by the handle while cords are
connected – this can damage the
cord where it connects to the
device, or cause damage to the
device itself.
8. Unlock (A), unlatch (B), and remove (C) the tablet.
A
A: Remove blue key from the voting equipment manuals and
supplies bag. Use the blue key to unlock the tablet from its cradle.

B


C