Hart InterCivic Verity Scan Polling Place Field Manual page 33

8. Seat the tablet in the cradle (A), tilt it back (B), and lock it in place (C).
Log the red CFAST seal number on the Security Log - AM.
Seat the tablet in the cradle (A), tilt it back (B), and lock it in place (C).
A
9. Verify the Verity Touch Writer
Log the red wire seal number
device seals, per local
found on the white panel box
(located to the right side of the
procedure. Attach privacy
cradle) on the Security Log - AM.
screens to both sides of the
booth.

Attach privacy screens to both
sides of the booth.
10. Plug the power cord into AC power. A green light
Plug the power cord into the UPS power backup unit.
should illuminate on the power brick when AC
A green light should illuminate on the power brick
when power is present.
power is present.
11. Press the switch on the bottom right side of the
Press the red button on the back of the Verity Touch
ballot printer to power it on.
Writer to power it on.
B

33

C