Hart InterCivic Verity Scan Polling Place Field Manual page 25

6. When you have finished printing reports,
press the red power button on the back of
the Verity Scan to power it off.
IMPORTANT: Wait for the Verity Scan to be
completely powered down and showing a
black screen if you will be unlocking and
removing the tablet. If stowing the tablet, make sure to lock it in with the
key and pull the blue latch down to secure it in place.
NOTE: The Verity power cord has a locking connector. When inserting the connector
into a Verity device, it will make a small "click." To disconnect the power cord, grasp
the cord at the base of the black connector molding where it connects to the Verity
device, and slide back the sleeve. This will unlock the connection so that the cord
may be removed.
7. Follow your local jurisdiction's guidelines, including chain-of-custody
procedures, when transferring equipment, vDrives, and/or ballots to your
central counting location. If you are leaving equipment in place, be sure to
properly secure all equipment, preferably behind a locked door. You may
use the space below to document local transfer procedures.

local procedures
25