Table of Contents
Advertisement
9.
Log the red CFAST seal number on the Security Log - AM.
9.
Seat the tablet in the cradle (A), tilt it back (B), and lock it in place (C).
Seat the tablet in the cradle (A), tilt it back (B), and lock it in place (C).
A
10.
Verify the Verity Scan device seals,
Log the red wire seal number
per local procedure. Attach privacy
found on the white panel box
screens to each side of the ballot
(located to the right side of the
box, if applicable.
cradle) on the Security Log - AM.
11.
Plug the power cord into AC power. A green
Plug the power cord into the Uninterrupted
light should illuminate on the power brick
Power Supply (UPS) battery backup unit. A
when AC power is present.
green light should illuminate on the power
brick when power is present.
12.
Press the red button on the back of the Verity
Scan to power it on.
During the power on process, a Power-On Self
•
Test report will print on Verity Scan's built-in
printer. This report will indicate any hardware
or connection issues; if any issues are noted,
check connections and restart the device using
the red power button.
B
11
C
Advertisement
Table of Contents
Troubleshooting
