Table of Contents
Advertisement
poll worker button
The blue poll worker button is located on the back of Verity
Scan. This button is used when suspending or closing polls.
In some jurisdictions, this button may be used when
scanning ballots with undervoted or overvoted contests; see
page 19.
report printer operation
1.
The thermal report printer is located on the right-
hand side of Verity Scan.
2.
To open the paper compartment: While standing
in front of the device, pull the lever on the top of
the printer cover towards you, and then lift up to
open the paper compartment.
3.
To replace paper: Place the new paper roll
into the printer as shown. Paper must roll
up from the bottom.
4.
Close the printer cover. The paper must extend
out from underneath the front edge of the cover.
The white button can be used to advance the
paper.
13
Advertisement
Table of Contents
Troubleshooting
