Hart InterCivic Verity Scan Polling Place Field Manual page 28

setting up Touch Writer
28
c)
The main tray extender kit for 17"/20" ballots
includes two parts:
The front piece installs into the MP Tray door, and is
•
used to support the ballots as they exit the printer.
The rear piece replaces the stock paper stop and rear
•
tray extension cover. Once installed, the extender can
support 14", 17", and 20" paper; however, the stock
paper stop must be reinserted to support 11" paper.
d)
Reinsert and close the paper tray.
Loading ballot paper in the manual paper tray (MPT)
In some jurisdictions, the manual paper tray must be used for larger paper
sizes; follow local procedures.
a)
Open the front
Manual Paper Tray
(MPT) and extend
the tray as shown.
b)
If applicable, place the optional tray extender in
the tray.
c)
Load ballot paper in the tray. Ensure the paper guides on the sides of
the tray are set snug to the paper.
5. Do not power on the printer at this time.


