Pushing first appliance into the cabinetry
Tools
Ruler
1
first appliance
Aligning the depth gauges
1
52
MULTIPLE INSTALLATION — ALIGN FIRST APPLIANCE INTO CABINETRY
min 7 1/16" (180mm)
PROFILE VIEW
top cap
depth gauge
Roll the first appliance slowly into one side of the cabinetry until the
anti-tip bracket overlaps the back edge of the appliance.
Ensure the bracket overlaps the appliance by a minimum 7 1/16" (180mm)
for a secure hold. Refer to 'Attach the anti-tip bracket' for more information.
anti-tip bracket
spacer
Align the top cap of the first appliance flush with the front of the spacer.
Mark the step of the depth gauges on the cabinetry side of the
door based on the thickness of door panel.
Align the marked line flush with the front surface of the adjacent
cabinetry.
marked line
Illustrations may differ from your purchased appliance.