Double Cabinet Setup - HandyTrac Key Control Installation And Operation Manual

Here's what you get and how to identify the various components
1. Primary cabinet left hand door open labeled "LH 2.0"
2. Secondary cabinet right hand door open labeled "RH 2.0"
3. Panels for primary cabinet labeled "Cab 1" and "LH"
4. Panels for secondary cabinet labeled "Cab 2" and "RH"
5. Control Box, Setup pack, and Datalog touchpad labeled "CB
& DL"
Installation Procedure:
1) Select the location where you are going to
mount the system. Remember that you
will need a minimum of 42" of wall space
for the system.
2) Mount the cabinet marked "LH 2.0" to the
far left of the space provided. Make sure
to leave enough space for the door to
swing open.
3) Mount the control box flush against the
primary cabinet making sure to route all
cables through the hole provided in the
cabinet. Leave lock and light cables loose at
this time.

Double Cabinet Setup

1
5
3
2
4
6