Accessing The System; Programming Fingerprints (Biometric Equipped) - HandyTrac Key Control Installation And Operation Manual

Accessing the System

This procedure is required for all activities.
1) The system must be at the Time/Date screen for a
user to gain access.
2) Scan your employee badge through data log with
the bar coded side facing toward the data log.
You will hear a beep, and the screen will change
to look like this.
3) Enter your 4 digit PIN#. You have now identified
yourself as an authorized user.
4) The screen prompts you to enter an activity.
Programming Fingerprints
to Badges
1) Scan into the datalog-keypad using any "Master"
access badge.
2) Select activity code "03" Scroll through the list of
employees using the "Enter" button.
3) Press the number "1" to program the fingerprint
once you have reached the correct employee
badge. Datalog will prompt you to touch finger to
Biometric reader.
4) Place finger firmly on the biometric reader so that
the crease of your finger is on ridge of the reader.
5) The Datalog keypad will instruct you to keep your
finger on the reader
6) The Datalog keypad will beep when it gets a good
read.
7) Press "Enter" button to proceed with the next
Employee badge or "OUT" if finished
OPERATION
(Biometric ONLY)
A :30
9:00
ENTER PIN
ACTIVITY?
TRANS#: 19 MAX:3000
J Doe
ENTER=NEXT 1=FINGPRT
PLACE FINGER ON BIO.
PLEASE HOLD FINGER
MON
2-23-15
159753
12