Final Checklist - Fisher & Paykel PROFESSIONAL RGV3-488 Installation Manual

TO BE COMPLETED BY THE INSTALLER
GENERAL
…
Specified clearance maintained.
…
Backguard installed if clearance to combustibles behind unit is less than 6" (152mm).
…
Anti-tip bracket is correctly installed.
…
Unit is level – front to back and side to side.
…
Griddle (if equipped) and burner pan supports are level and does not rock.
…
All packaging materials have been removed. Check below grate and inside the oven.
…
Oven door hinges seated and door opens and closes properly.
…
Dials turn correctly and freely.
…
Burners light satisfactorily, both individually and with other burners operating.
…
Flame adjustments made if required.
…
Front toe kick panel in place and two screws are secure.
Complete and keep for safe reference:
Model
Serial no.
Purchase date
Purchaser
Dealer address
Installer's name
Installer's signature
Installation company
Installation date
20

FINAL CHECKLIST

GAS
…
Site gas supply is compatible with range.
…
LP Connection: 1/2" NPT Minimum 5/8" dia. flex line. Supply Pressure: 11" to 14" W.C.
…
NG Connection: 1/2" NPT Minimum 5/8" dia. flex line. Supply Pressure: 6" to 9" W.C.
…
Manual gas shut-off valve installed in an accessible location.
…
Unit tested and free of gas leaks.
ELECTRICAL
…
Receptacle with correctly rated and over-current protection is provided for service
cord connection.
…
Adequate ground connection.