Fisher & Paykel PROFESSIONAL RGV3-488 Installation Manual page 15

1. REMOVE TOE KICK
1
FRONT VIEW
2
PROFILE VIEW
1
2
3
* removal not required if range is secured at rear by brackets.
** model dependant.
UNPACKING THE RANGE
Remove both screws to detach
the toe kick from the range.
Lift toe kick up and rotate
towards you to remove.
3. REMOVE FROM PALLET
Remove front bolts
Remove the two shipping
bolts made visible by
removing the toe kick.
Remove lower guard*
Unscrew the lower guard
panel from the back of
the range to remove.
Remove rear bolts or brackets**
Remove the two shipping bolts
or brackets.
1
2
packing sheet
2. REMOVE DOORS
Open the door completely and
open the hinge locks fully on
both sides.
HINGE DETAIL
Holding the door on both sides,
lift door back up to 45° and
carefully pull the door out and
away from the hinges.
PROFILE VIEW
packing sheet
restraining
strap
Before restraining the product to the
hand truck, place two cardboard packing
sheets (shipped with the product)
against both side panels as shown.
Tilt the product and insert hand truck.
DO NOT insert the hand truck to the
front of the product.
Restrain the product and packing sheets
to the hand truck using straps and tilt
onto hand truck. Set pallet aside and pull
product to the installation location.
IMPORTANT!
Two people required.
15