Replacing Fluorescent Lamps; Replacing Lamp Holders And End Caps - Hussmann IMPACT Elite E1 Installation And Operation Manual

6-2 S
ERVICE

REPLACING FLUORESCENT LAMPS

Fluorescent lamps are furnished with moisture
resistant lamp holders, shields and end caps.
Whenever a fluorescent lamp is replaced, be cer-
tain to reinstall the lamp shields and end caps.
The switch in the canopy operates both the
canopy and the shelf lamps. The rail lamp switch
is located on the rail.
Plastic Shield
Fluorescent
Lamp
P/N 0453523
End Cap
REPLACING LAMP HOLDERS AND
END CAPS
The Impact lamp holder is designed to snap into
the sheet metal of the case. The lamp holder has
a locking 'nub' which fits inside the groove of
specially designed end caps.
Impact
End-Cap
IMPORTANT!
Always replace lamp holders and end caps with
Hussmann lamp holders and end caps.
Use of non-Hussmann parts may result in poor
electrical contact and short lamp life.
Groove
Nub
Impact
Lamp Holder