Supported Plugs For The 4000-W Ac Power Supply - Cisco MDS 9200 Series Installation Manual

MGMT 10/100 Ethernet Port
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure C-7
110 VAC.
Note Using the plug in
Figure C-7
1 NEMA 5-20P

Supported Plugs for the 4000-W AC Power Supply

Figure C-8
power supply is nondetachable.
Figure C-8
1 International
Cisco MDS 9200 Series Hardware Installation Guide
C-10
shows an additional plug that is supported for the 3000-W and 2500-W power supply, using
Figure C-7
Additional Power Supply Plug Supported for 3000-W and 2500-W 110 VAC Only
North American power cord product ID: CAB-7513AC
110 VAC (20 A)
shows the supported plugs for the 4000-W AC power supply. The power cable on the 4000 W
4000-W Power Supply Plugs
1
(4000-W power supply)
IEC 60309 (3 0A, 250 V)
at 110 VAC results in 1300 W available to the system.
2
2 North America (Locking)
(4000-W power supply)
NEMA L6-30 plug (30 A, 250 V)
Appendix C Cable and Port Specifications
OL-19588-01