Supported Plugs For The 4000-W Ac Power Supply; Jumper Power Cord - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Appendix C Cable and Port Specifications

Supported Plugs for the 4000-W AC Power Supply

Figure C-8
power supply is nondetachable.
Figure C-8
1 International

Jumper Power Cord

Figure C-9
9500 Series. The C19 connector plugs into the C20 inlet on the Cisco MDS 9500 Series power supply,
while the C20 connector plugs into the C19 receptacle of a power distribution unit for a cabinet.
Figure C-9
1
OL-16188-01
shows the supported plugs for the 4000-W AC power supply. The power cable on the 4000 W
4000-W Power Supply Plugs
1
(4000-W power supply)
IEC 60309 (3 0A, 250 V)
shows the C19 and C20 connectors on the optional jumper power cord for the Cisco MDS
End of C19 and C20 Connectors on Jumper Power Cord for Cisco MDS 9500 Series
C19
C20
C19 and C20 connectors on jumper power cord for Cisco 9500 Series
Power cord product ID:CAB-C19-CBN
250 VAC 16 A, C20-C19 connectors
2
2 North America (Locking)
(4000-W power supply)
NEMA L6-30 plug (30 A, 250 V)
Cisco MDS 9200 Series Hardware Installation Guide
Supported Power Cords and Plugs
C-11