Weight Of Modules - Cisco MDS 9200 Series Installation Manual

Appendix B Technical Specifications
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table B-3
Description
Altitude, designed and tested for
operation
Physical Characteristics
Dimensions
Weight
Table B-4
Module.
Table B-4
Description
Nominal voltage
Rated capacity
Discharge
Charge
Storage temperature
Relative humidity range From 5 to 90%

Weight of Modules

Table B-5
Table B-5
Module
16-port Storage Services Node (DS-X9316-SSNK9)
4/44-port 8-Gbps Host-Optimized switching module
48-port 4-Gbps switching module
24-port 4-Gbps switching module
12-port 4-Gbps switching module
4-port 10-Gbps switching module
32-port FC switching module
OL-19588-01
Cisco MDS 9200 Series Module Specifications (continued)
lists the specifications for the batteries on the Cisco MDS 9000 Family Caching Services
Caching Services Module Battery Specifications
Specification
9.6 V
Typical discharge capacity at 0.2C rate: 2100 mAh
Minimum discharge capacity at 0.2C rate: 2000 mAh
Minimum discharge capacity at 5C rate: 1800 mAh
(1V/cell discharge cut-off)
The battery is capable of continuous discharge from
(41 to 140°F (5 to +60°C) at 5C-rate
From 32 to 59°F (0 to 15°C) at C/10 rate and from 59
to 104°F (15 to 40°C) at C/2-rate
32 to 95°F (0 to 35°C)
lists the weight for each module in the Cisco MDS 9000 Family.
Weight of Modules in the Cisco MDS 9000 Family
Specification
-200 to 10000 ft (-60 to 3000 m)
1.75 x15.5 x16.5 in. (4.4 x 39.4 x 41.9 cm)
These are the maximum
Note
dimensions of faceplate and board,
and include connectors on board.
8 to 11.5 lb (1.4 to 5.2 kg)
Weight
10.0 lb (4.5kg)
9.75 lb (4.42 kg)
11.0 lb (4.99 kg)
7.75 lb (3.5 kg)
7.5 lb (3.40 kg)
8.5 lb (3.86 kg)
9 lb (4.1 kg)
Cisco MDS 9200 Series Hardware Installation Guide
Module Specifications
B-3