Appendix; Technical Specifications; Switch Specifications - Cisco MDS 9200 Series Installation Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Technical Specifications

This appendix includes the following sections:
•
•
•
•
•
Specifications for cables and connectors are provided in
Note

Switch Specifications

This section provides switch specifications for theCisco MDS 9200 Series.
Table B-1
Table B-1
Description
Temperature, certified for operation
Temperature, designed and tested for operation 32 to 130°F (0 to 55°C)
Temperature, ambient nonoperating and storage -40 to 158°F (-40 to 70°C)
Humidity (RH), ambient (noncondensing)
operating
Humidity (RH), ambient (noncondensing)
nonoperating and storage
Altitude, certified for operation
Altitude, designed and tested for operation
Noise levels
OL-19588-01
Switch Specifications, page B-1
Module Specifications, page B-2
Power Specifications, page B-4
X2 Transceiver Specifications, page B-7
SFP and SFP+ Transceiver Specifications, page B-10
lists the environmental specifications for the Cisco MDS 9200 Series.
Environmental Specifications for the Cisco MDS 9200 Series
A P P E N D I X
Appendix C, "Cable and Port Specifications."
Specification
32 to 104°F (0 to 40°C)
10 to 90%
5 to 95%
0 to 6500 ft (0 to 2000 m)
-200 to 10000 ft (-60 to 3000 m)
70 dB
Cisco MDS 9200 Series Hardware Installation Guide
B
B-1