Appendix B Technical Specification; Module Specifications - Cisco MDS 9200 Series Installation Manual

Cisco systems hub/switch installation guide
Hide thumbs Also See for MDS 9200 Series:
Table of Contents

Advertisement

Module Specifications

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table B-2
Table B-2
Description
Dimensions
(HxWxD)
Weight
Power supply 845-W AC input for each power supply
Airflow
1. RU = rack unit; 1 RU = 1.75 inches (4.45 cm)
2. lfm = linear feet per minute
3. cfm = cubic feet per minute
Table B-3
the chassis) and the switching and services modules.
Module Specifications
This section provides the Cisco MDS 9200 Series module specifications.
Table B-3
Description
Environmental Requirements
Temperature, certified for operation 32 to 104°F (0 to 40°C)
Temperature, designed and tested
for operation
Temperature, ambient nonoperating
and storage
Humidity (RH), ambient
(noncondensing) operating
Altitude, certified for operation
Cisco MDS 9200 Series Hardware Installation Guide
B-2
lists the physical specifications for the Cisco MDS 9200 Series.
Physical Specifications for the Cisco MDS 9200 Series
Specification
5.25 x 17.5 x 22.75 in. (13.3 x 44.5 x 57.8 cm)
Chassis requires 3 RU
Chassis depth including cable guide is 27.75 in. (70.3 cm).
Chassis only: 31 lb (14.1 kg).
Chassis configured with one supervisor module, fan module, and
two power supplies: 53.3 lb (24.3 kg).
2
300 lfm
through system fan module, or 80 cfm
switching, or services module. Total of 160 cfm if slot 2 is filled.
Spacing requirements:
If installed in a cabinet, a minimum of 2.5 in. (6.4 cm) is
required between the chassis air vents and the cabinet walls.
If installed in an open rack (no side panels), the horizontal
distance required between the chassis and any devices that
exhaust air towards the chassis is a minimum of 6 in.
(15.2 cm), and the distance required between the chassis air
vents and any walls is a minimum of 2.5 in. (6.4 cm).
lists the specifications for the Cisco MDS 9200 Series supervisor module (which is fixed in
Cisco MDS 9200 Series Module Specifications
1
.
Specification
32 to 130°F (0 to 55°C)
-40 to 167°F (-40 to 75°C)
10 to 90%
0 to 6500 ft (0 to 2000 m)
Appendix B
Technical Specifications
3
per supervisor,
OL-19588-01

Advertisement

Table of Contents
loading

Table of Contents