Table of Contents
Advertisement
► Keep the product away from open flames, embers and other sources of
heat.
NOTICE
Contact with oils, salves, lotions or other products that contain oils
or acids
Insufficient stabilization due to loss of material functionality
► Do not expose the product to oils, salves, lotions or other products that
contain oils or acids.
NOTICE
Improper use and changes
Change in or loss of functionality as well as damage to the product
► Use this product with care and only for its intended purpose.
► Do not make any improper changes to the product.
4 Handling
INFORMATION
► The daily duration of use and period of application are generally deter
mined by the physician.
► The initial fitting and application of the product must be carried out by
qualified personnel.
► Instruct the patient in the handling and care of the product.
► Instruct the patient to see a physician immediately if any exceptional
changes are noted (e.g. worsening of the complaint).
4.1 Selecting the Size
1) Measure the wrist circumference.
2) Determine the size of the support (see size chart).
4.2 Adaptation
>
Open all hook-and-loop closures.
1) Insert the plastic bar into the support.
2) Fill the bag with hot water (approx. 75 °C) and heat the plastic bar until it
can be shaped.
3) Once the support has cooled slightly, pull it over the wrist, placing the
loop over the thumb.
4) Fasten all hook-and-loop closures.
11
Advertisement
Table of Contents
