Ec Messages - Cisco Intelligent Gigabit Ethernet Switch Module Manual

DTP-5-TRUNKPORTON: Port [chars] has become [chars] trunk.
Explanation This message means that the interface changed from an access to a trunk. The first [chars]
is the interface, and the second [chars] is the encapsulation.
Response This message is provided for information only.

EC Messages

EC-4-NOMEM: Not enough memory available for [chars].
Explanation This message means that either the LACP or the PAgP EtherChannel could not obtain the
memory it needed to initialize the required data structures. [chars] is the name of the data structure.
Response Find out more about the error by using the show tech-support privileged EXEC command and
by copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about these
online tools , see the "Error Message Traceback Reports" section on page
EC-5-BUNDLE: Interface [chars] joined port-channel [chars].
Explanation This message means that the listed interface joined the specified EtherChannel. The first
[chars] is the physical interface, and the second [chars] is the EtherChannel interface.
Response No action is required.
EC-5-CANNOT_ALLOCATE_AGGREGATOR: Aggregator limit reached, cannot allocate aggregator for group [dec].
Explanation This message means that the aggregator cannot be allocated in the group.
Response Change the port attributes of the ports in the group so that they match and join the same
aggregator.
EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in channel [dec] and cannot attach to
them ([chars]).
Explanation This message means that the port has port attributes that are different from the port
channel or ports within the port channel.
Response Change the port attributes so that they match the other ports in the EtherChannel.
18
Cisco Systems Intelligent Gigabit Ethernet Switch Module for the IBM Eserver BladeCenter System Message Guide
This section contains the EtherChannel, Link Aggregation Control Protocol (LACP),
and Port Aggregation Protocol (PAgP) messages.
9.