Table of Contents
Advertisement
to period examination performed by a Sanitary and Epidemiological Station, in order to
measure the level of electromagnetic field emission and define
room.
Attention!!!
The warning signs compliant with PN-74/T-06260 must be located next to the entrance to the
room where the machine operates. In addition, there must also be a site plan showing all
locations where electromagnetic field intensity was measured.
After finishing work:
travel by a specific value, to remove the electrode from the material (Manual Mode [R]
-> Travel -> By the value),
deactivate the main switch,
drain petroleum,
make sure there is no leak from the dielectric fluid tank,
disconnect the plug from the mains,
before leaving the room, make sure that fire extinguishers are in their proper places.
7. DESCRIPTION OF ADJUSTMENT RANGES PRESENTED ON FRONT
PANELS
© Zakład Automatyki Przemysłowej B. P.
"
"
hazard areas
in a given
6
Advertisement
Table of Contents
