Table of Contents
Advertisement
Screen:
Course of action:
1) Select a specific character and the axis for which we intend to declare new operator's coordinates, by
pressing an appropriate key included in the directional keypad (see Fig. 1).
o
The entry window dedicated to the selected axis will be displayed.
2) Enter the required value of coordinate, using the numeric keypad ([DEL] – Deletes the entered
character; [ESC] – Cancels the option of entering a value).
3) Accept the entered value, by pressing [ENT].
4) Declaration of coordinate for another axis – go back to item 1.
5) Confirm the declared coordinates, by pressing [F1] "Accept".
Attention!!!
If physical coordinates are modified manually, it may have a negative impact on the
"
Point
function (see item 2.1.4), and lock
perform a single resetting of physical coordinates, using the
the conditions below has occurred:
a) The machine has been started for the first time;
b) The machine has been moved to a different working station;
c)
The machine has undergone repairs that required the disconnecting of the generator from the
mechanical section of the machine.
2.3 Alignment
2.3.1 Within a hole
Intended use: This function enables automatic centring of the electrode within a gap or hole.
The available options of alignment include:
A hole in the XY-plane;
A hole in the XZ-plane;
A hole in the YZ-plane;
In a gap, along the X-axis;
In a gap, along the Y-axis;
In a gap, along the Z-axis.
Access path: Manual Mode [R] -> Alignment -> In a hole
Course of action:
1) Move the head in such a way that the electrode sinks in the hole.
2) Identify the type of alignment.
o
When a particular type of alignment has been selected, the following symbol will precede it:
o
To select a particular type of alignment, use the block of navigational keys (see Fig. 3). See below to
learn about the operations assigned to each of the keys:
↑
[1] [
] The cursor moves up to another item on the list;
↓
[2] [
] The cursor moves down to another item on the list.
"
"
manual travel
in the selected direction. It is recommended to
"
Travel Home
"
Travel to Characteristic
"
function (see item 2.1.4), if one of
"
"
>>
.
12
Advertisement
Table of Contents
