Table of Contents
Advertisement
Course of action:
1) Select a program.
o
When a particular program has been selected, the following symbol will precede it: ">>".
o
To select a particular program, use the block of navigational keys (see Fig. 3). See below to learn about
the operations assigned to each of the keys:
[1] [↑] The cursor moves up to another item on the list;
[2] [↓] The cursor moves down to another item on the list.
2) Choose one from the following options:
a.
Interpret and load a program as the default one to be carried out in the automatic mode, by
pressing [F1] "Load".
o
When a particular program has been loaded, the following symbol will precede it: "ѵ". If the
program has been written incorrectly, a message informing about problems with
interpretation will be displayed.
b. Delete the program by pressing [DEL],
c.
View the program by pressing [ENT].
o
A command listing will be displayed.
o
To view a particular program, use the block of navigational keys (see Fig. 3). See below to learn about
the operations assigned to each of the keys:
[3] [←] Return to the previous page;
[4] [→] Go to the next page.
3.2 Transfer of program
Intended use: This function enables receiving a text file transferred for a PC. There are two methods of data
transfer: via RS232 or Bluetooth.
Access path: Programming [P] -> Transfer program -> RS232/Bluetooth
Screen:
Course of action:
1) Enter the name of file. The name can have up to 8 characters. You can enter characters in the
following ranges: <A; Z> and <0; 9>.
a.
The range of entered characters (<A; Z> or <0;9>) can be defined with the following key: [F1]
"
ABC/123
o
To enter a particular name, use the block of navigational keys (see Fig. 3). See below to learn about the
operations assigned to each of the keys:
↑
[1] [
] If the range is <0;9>, the value will be modified by +1. If the range is <A; Z>, the next letter in
the alphabet is displayed.
"
18
Advertisement
Table of Contents
