Table of Contents
Advertisement
Screen:
Course of action:
1) Select a working attribute.
o
When the particular attribute has been selected, the following symbol will precede it: ">>".
o
To select a particular attribute, use the block of navigational keys (see Fig. 3). See below to learn about
the operations assigned to each of the keys:
[1] [↑] The cursor moves up to another item on the list;
[2] [↓] The cursor moves down to another item on the list.
2) Press [F1] "Activate" to activate the particular attribute.
o
When the particular attribute has been activated, the following symbol will follow it: "ѵ".
3) Press [F2] "Deactivate" to deactivate the particular attribute.
o
When the particular attribute has been deactivated, the following symbol will follow it: "---".
3 Programming Mode
3.1 List of programmes
Intended use: This function enables viewing and deleting programmes, as well as selecting one of them to be
carried out in the automatic mode. It is only possible to store up to 20 programmes on an SD card.
with programmes are stored on an SD card, in the following directory:
Access path: Programming [P] -> List of programmes
Screen:
Text files
E:\Gc\.
17
Advertisement
Table of Contents
