Table of Contents
Advertisement
↓
[2] [
] If the range is <0;9>, the value will be modified by -1. If the range is <A; Z>, the previous letter
in the alphabet is displayed.
←
[3] [
] The cursor moves to the previous item of the entered name.
→
[4] [
] The cursor moves to the successive item of the entered name.
3) Accept the name by pressing: [F2]
o
The display will show the following message:
4) Send the program for a computer, making sure that you have pre-set appropriate parameters of
transmission: Baud rate=9600bps, Data bits=8b, Stop bit=1, Parity=No, Flow control=No.
o
If transfer is successful, the user will be redirected to: Programming [P] -> List of programmes
3.3 New program
Intended use: This function enables saving the new program.
Access path: Programming [P] -> New program
Course of action:
1) Enter the name of file. The name can have up to 8 characters. You can enter characters in the
following ranges: <A; Z> and <0; 9>.
a.
The range of entered characters (<A; Z> or <0;9>) can be defined with the following key: [F1]
"ABC/123"
o
To enter a particular name, use the block of navigational keys (see Fig. 3). See below to learn about the
operations assigned to each of the keys:
[1] [↑] If the range is <0;9>, the value will be modified by +1. If the range is <A; Z>, the next letter in
the alphabet is displayed.
[2] [↓] If the range is <0;9>, the value will be modified by -1. If the range is <A; Z>, the previous letter
in the alphabet is displayed.
[3] [←] The cursor moves to the previous item of the entered name.
[4] [→] The cursor moves to the successive item of the entered name.
2) Accept the name by pressing: [F2] "Accept".
3) Save the program.
a.
Select the type of code: [F2] "G-code", [F3] "M-code".
b. Enter the required value of code, using the numeric keypad ([DEL] – Deletes the entered
character; [ESC] – Cancels the option of entering a value).
c.
Accept the entered value, by pressing [ENT].
o
If a particular G-code requires defining its parameters to work correctly, a list of elements
accompanied with default values will be displayed on the screen. However, if a particular G-code
requires no parameters, and we intend to:
continue writing the program, go back to item a;
finish writing the program, press [F1] "Save".
d. Provide correct values in the list of parameters.
i. Open the window dedicated to entering values corresponding to a given parameter
ii. Enter the required value, using the numeric keypad ([DEL] – Deletes the entered
iii. Accept the entered value, by pressing [ENT].
e.
If you want to declare another G-code: go back to item a, or finish writing the program by
pressing [F1] "Save".
o
If the operation is successful, the user will be redirected to: Programming [P] -> List of programmes
"
Accept
(a list of keys that call windows dedicated to entering each individual parameter is
shown In Table 3.1).
character; [ESC] – Cancels the option of entering a value).
"
.
"
Machine waiting for data
"
.
19
Advertisement
Table of Contents
