Control Panel; Keyboard Layout - ZAPbp BP93p Operator's Manual

1 Control Panel

1.1 Keyboard Layout

The keyboard attached to the operator panel is comprised of the following elements:
[1] A block of directional keys (they control the direction of movement and the turning movement of the
working bit of the machine machine);
[2] The Ignore Short Circuit button [IZR] (it is used during travelling, if it is necessary to ignore the contact
between the working bit and the table; if this function is active, the following messages appears on
the screen: IZR);
[3] A numeric keypad;
[4] A block of navigational keys (it is used to navigate through the controller menu);
[5] A block of [P], [R], and [A] keys that are used to select one of the following working modes:
Programming, Manual Mode, or Automatic Mode.
[6] The [STOP] button (it is used to stop any current operation);
[7] The [DEL] button (it is used to delete individual programmes);
[8] A block of [F1], [F2], and [F3] functional keys (their current function is displayed on a LCD display,
directly above each of the buttons).
Fig. 1
4