Table of Contents
Advertisement
Screen:
o
To navigate through the list of archived data, use the block of navigational keys (see Fig. 3). See below
to learn about the operations assigned to each of the keys:
←
[3] [
] Return to the previous page;
→
[4] [
] Go to the next page.
2.5 Settings
2.5.1 Date/Time
Intended use: This function enables setting the current date and time.
Access path: Manual Mode [R] -> Settings -> Date/Time
Course of action:
1) Select and set the date/time component.
o
If a particular component is underlined (the cursor appears under it), it indicates that the component
has been selected.
o
To change date/time, use the block of navigational keys (see Fig. 3). See below to learn about the
operations assigned to each of the keys:
[1] [↑] The value is modified by +1;
[2] [↓] The value is modified by -1;
[3] [←] The cursor moves to the element on the left;
[4] [→] The cursor moves to the element on the right.
2) Confirm the declared date/time, by pressing [F1] "Accept".
2.5.2 Type of rotating instrument
Intended use: This function enables selecting the currently applied rotating instrument. Each of the
instruments available for selection features a different gear ratio applicable to the engine shaft (driving shaft)
and the working shaft (driven shaft), which means that the machine must receive preliminary data, concerning
the type of instrument it will work with. The
mentioned instruments.
The following options can be selected:
Rotary head (GO-...);
Rotary table (PDT-...);
Lathe (TE-...).
Access path: Manual Mode [R] -> Settings -> Type of rotating instrument
"
"
A
axis is responsible for the rotary movement of the afore-
15
Advertisement
Table of Contents
