Table of Contents
Advertisement
If there is a problem, check the chart below to see if you can fix it. If the problem cannot
be fixed or persists, call your Fisher & Paykel trained and supported service technician
or Customer Care.
General
PROBLEM
The oven does not work.
The oven does not work
but the display is lit.
One or all of the lights
do not come on, but the
oven works.
There is a power failure –
can I still use the oven?
The temperature indicator is
blank and the oven control
dials are unresponsive.
The oven is not heating.
TROUBLESHOOTING
POSSIBLE CAUSES
No power.
The clock has not been set
The oven is set for
automatic cooking.
The oven is in Demo Mode
The oven light bulb(s)
have blown.
The door is not correctly fitted.
The oven is in Sabbath Mode
and the 'Light off' option has
been saved.
Power outage in your home or
neighborhood.
The control panel is locked.
The door is not properly closed
or it is opened too frequently
during cooking.
WHAT TO DO
Check that the mains power
supply (wall switch) is turned on,
the fuse has not tripped and there
is no power outage in your area.
The oven will not work unless the
clock is set. See 'Setting the clock'.
See 'Auto Cook' for instructions.
Contact Customer Care
Replace the light bulb(s). See
'Care and cleaning' for instructions.
See 'Care and cleaning' for
instructions on fitting the
door correctly.
To quit Sabbath Mode, press
and hold CANCEL. See 'User
preference settings' for
instructions on changing the
'Light off' option.
In the event of power failure while
cooking, return the oven dials
in off position (O) to prevent
overheating of the appliance. The
oven cannot be used until power
is restored.
See 'Locking the oven controls'
for instructions.
The heating elements are disabled
while the door is open.
Make sure the door is properly
closed and avoid opening it
frequently during cooking.
67
Advertisement
Table of Contents
