Troubleshooting - Fisher & Paykel OR90SCI1X Series User Manual

Freestanding cooker
Hide thumbs Also See for OR90SCI1X Series:
Table of Contents

Advertisement

If there is a problem, check the chart below to see if you can fix it. If the problem cannot be
fixed or persists, call your Authorised Repairer or Customer Care.
General
PROBLEM
The oven does not work.
The oven does not work but
the display is lit.
One or all of the lights
do not come on, but the
oven works.
The oven is not heating.
A glass pane in the oven
door has cracked, chipped,
or shattered.
I can feel hot air blowing
out of the vents after I have
turned the oven off.
56

TROUBLESHOOTING

POSSIBLE CAUSES
No power.
The clock has not been set
The oven is set for
automatic cooking.
The oven is in Demo Mode
The oven light bulb(s)
have blown.
The door is not correctly fitted.
The door is not properly closed
or it is opened too frequently
during cooking.
Incorrect cleaning or the edge of
the glass hitting against something.
This is normal.
WHAT TO DO
Check that the mains power
supply (wall switch) is turned on,
the fuse has not tripped and there
is no power outage in your area.
The oven will not work unless the
clock is set. See 'Setting the clock'.
See 'Auto Cook'
for instructions.
Contact Customer Care
Replace the light bulb(s). See
'Care and cleaning' for instructions.
See 'Care and cleaning' for
instructions on fitting the door
correctly.
The heating elements are
disabled while the door is open.
Make sure the door is properly
closed and avoid opening it
frequently during cooking.
You must NOT use the oven.
Call your Authorised Repairer or
Customer Care.
For safety reasons the cooling fans
will continue to run even when
you have turned the function
dial to OFF. The fans will switch
off automatically when the oven
has cooled.

Advertisement

Table of Contents
loading

Table of Contents