Hornbach 10530795 Operating Manual page 161

Open the battery cover on the bottom of the remote control unit, press the clasp on the battery
cover inwards and pull it out. Remove the battery securing strips. Be sure to observe the correct
polarity (+/-).
To replace the battery:
1. Open the battery cover on the bottom of the remote control unit, press the clasps on the battery
cover inwards and pull it out. Remove the old battery.
2. Observe the correct polarity (+/-). Use only battery type CR2025. Dispose of old batteries in an
environmentally friendly manner and in accordance with your country's regulations.
3. Slide the battery cover on the bottom of the remote control unit back into the unit.
Take care not to bend the contacts. Insert the new battery and close the battery compartment
cover.
NOTE
If you do not intend to use the remote control for an extended period (4 weeks or more),
remove the batteries from the remote control unit.
Obligatory wall mounting. Attention!
The lowest part of the appliance must be at least 180 cm above the floor.
161