Place of use and connection to power supply
1. Remove all packaging material and keep this away from the reach of children. After removing
the packaging, check for any damage or signs of damage to the appliance.
If in doubt, do not use the appliance and contact your dealer.
2. Choose a suitable location for installing the appliance and observe all the warnings in this
operating manual.
It is preferable to install the bathroom fan heater with a hard-wired power connection (rather
than via plug and socket), particularly if it is used in a wet room.
Such a connection can only be made by an authorised electrician and is therefore not
For this reason, it is assumed in this manual for safety reasons that you are carrying out a DIY
Passages in the manual that refer to the plug do not apply in the case of a hard-wired
Insertion/replacement of batteries in the remote control unit
IMPORTANT
further discussed here.
installation using the plug and socket connection.
connection.
Description of the appliance
(1)
Main switch with indicator lamp
(2)
Display
(3)
Timer button
(4)
Function button (F)
(5)
Air inlet grille (rear)
(6)
Air outlet grille (front)
160