Fisher & Paykel DW60UZ6B Troubleshooting

Dishwasher Will Not Start
Possible Cause
Power supply is not
connected
The door is not closed
properly
Start/Pause button
has not been pressed
Water tap not turned on
Blocked strainer in water inlet
hose
Keylock or Childlock feature
is on
Inlet hose
You may need assistance from one of our qualified service technicians.
BOOK A SERVICE
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashers/DW60UZ6B/Troubleshooting_and_Fault_Codes/Troubleshooting...
What to Do
Ensure the dishwasher is plugged in and the power supply is turned on at the wall.
Ensure the door is firmly closed.
Press the Start/Pause button
Ensure water is connected and turned on.
Check the strainer and clean if necessary, it is located where the water inlet hose
screws into the tap.
The Keylock feature has been
The inlet hose may be kinked, check your Installation manual for instructions on
inlet hose.
Still Need Help?
Click on the button below to schedule a visit.
or Contact Us
activated, Click for Instructions on your Model.
Updated: Mon, 08 May 2023 00:37:08 GMT
Powered by
1