Advertisement
Table of Contents
Setting Delay Start
This feature can delay the start of a wash programme by 1 to 12 hours.
1. Load the dishes, add detergent and close the door.
2. Open the door to turn the dishwasher on.
3. Check that the display shows the wash programme you require. If not, see instructions for 'Changing the wash
programme'.
4. Press and hold ►
• The delay start indicator
will flash and the display will show the delay time (hours).
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashers/DW60U2I1/User_Guide_DW60U2I1/03_Setting_Delay_Start
Updated: Sat, 26 Feb 2022 10:24:27 GMT
Powered by
1
Advertisement
Table of Contents
Related Manuals for Fisher & Paykel DW60UU2I1
Summary of Contents for Fisher & Paykel DW60UU2I1
- Page 1 Setting Delay Start This feature can delay the start of a wash programme by 1 to 12 hours. 1. Load the dishes, add detergent and close the door. 2. Open the door to turn the dishwasher on. 3. Check that the display shows the wash programme you require. If not, see instructions for ‘Changing the wash programme’.
- Page 2 5. Press ► again to increase the number of hours you wish to delay the wash by (1hr - 12hr in hour steps). Scrolling past 12 hours will exit delay start. 6. Delay start is now set. The display will countdown in hours. The wash programme will automatically start when the delay time is over.
Need help?
Do you have a question about the DW60UU2I1 and is the answer not in the manual?
Questions and answers