Table of Contents
Advertisement
C2, C4 Dishwasher
We highly recommend using liquid rinse aid regularly to get the best drying results.
Rinse aid gives a streak-free, sparkling clean look to glass and chinaware. In addition, it
prevents metal from tarnishing.
When to refill the rinse aid dispenser
When rinse aid level becomes low, the rinse aid
indicator on the control panel will light up to
remind you to refill the dispenser.
Adjusting the rinse aid dosage
The normal, factory-set dosage level is 5, but you
may need to adjust this to suit your water conditions.
If there is excessive foaming at the end of the wash,
z
z
reduce the dosage.
If you live in a hard water area or if dishes are wet
z
z
or streaky after drying, increase the dosage.
To adjust the rinse aid setting:
z
z
see 'User preference settings' for how to do this.
If you are using tablets with built-in rinse aid, we
z
z
recommend setting the rinse aid dosage
rA-
level to off (
How to refill the rinse aid dispenser
1 Touch the button to snap the dispenser cover open.
2 Pour rinse aid into the circular opening, making sure not
to fill beyond the MAX marking.
IMPORTANT!
Take care not to spill rinse aid into the dishwasher.
Any spills must be wiped up to prevent excess
foaming. Failure to do so may result in a service
call, which will not be covered by warranty.
3 Close the cover, making
sure it clicks shut.
USING RINSE AID
).
C6 Dishwa
Rinse aid indicator
(on control panel)
Dosage regulator
Button
17
Advertisement
Table of Contents
