Fisher & Paykel OR90SPI6 User Manual page 76

Hide thumbs Also See for OR90SPI6:
Table of Contents

Advertisement

Self Clean function
PROBLEM
During a Self Clean
cycle, the oven is louder
than usual.
The Self Clean cycle is
finished, but the oven door
will not open.
I have cancelled a
Self Clean cycle but
cannot use the oven:
the oven door will
not open
the display is still
counting down minutes
or showing
Self Clean Canceled
the dials and controls
are unresponsive.
The oven is beeping
and the display shows
or
.
There is a power cut during
a Self Clean cycle.
76
TROUBLESHOOTING
POSSIBLE CAUSES
This is normal: the oven's cooling
fans operate at their highest speed.
The oven door is locked because
the oven is still too hot to be used
for cooking.
This is normal: if the function dial
halo is unlit, you have successfully
cancelled the Self Clean cycle.
However, the oven is still too hot to
be used for cooking and needs to
cool down.
See section 'Alert codes'
for instructions.
Power cut.
WHAT TO DO
Wait until the Self Clean cycle
has finished. If you cancelled
a Self Clean cycle which was
already underway, the oven still
needs to cool down before it
can be used. The oven door will
automatically unlock.
Wait until the cool-down phase
has finished. A long tone will
sound and the oven door will
automatically unlock when the
oven is ready to use.
Note: depending on when the Self
Clean cycle was cancelled, the
cool-down phase may take up to
45 minutes.
The door will remain locked.
Once the power is turned back
on, the door will remain locked
until the oven has cooled to a
safe temperature.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Or90sci6Or90sdi6

Table of Contents