Fisher & Paykel OR90SDBGFX3 Installation Instructions Manual

Installation Instructions
Fig.1 Dimensions and distances from cooker
The cooker must be installed by a qualified technician and in compliance with local safety standards. This cookers has
class "2/1" overheating protection so that it can be installed next to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a gap of at least 200 mm must
be left between the side of the cooker and the furniture. The furniture walls adjacent to the cooker must be made of
material resistant to heat.The veneered synthetical material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a room containing a bath or
shower.
Curtains must not be fitted immediately behind appliance or within 500 mm of the sides.
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent falling out.
It is essential that the cooker is positioned as stated.
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX...
Updated: Thu, 26 Mar 2020 03:34:19 GMT
Powered by
1