Instructions For Use - Otto Bock 2R30 Instructions For Use Manual

► Take suitable measures if required (e. g. repair, replacement, inspec­
tion by the manufacturer's customer service etc.).
► Inform the patient.
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an altered
gait pattern, a change in the positioning of the prosthesis components relat­
ive to each other and by the development of noises.
4 Scope of Delivery
The scope of delivery for the product is shown on page 2 (Figure 1).
The following single components and accessories are included in the scope
of delivery in the specified quantities and are available for reordering as
single components ( ), single components with minimum order quantities
( ) or single-component packs ( ):
Fig. Item
No.
– –
Fig. Item
No.
– –
4 1
4 –
2
3
4
4 6
5 Preparation for Use
CAUTION
Incorrect alignment or assembly
Injuries due to fall resulting from damaged prosthesis components
► Observe the alignment and assembly instructions.
14 | Ottobock
Quant­ Designation
ity
1

Instructions for Use

4R56, 4R56=1, 4R56=2 Tube Clamp Adapter
Quant­ Designation
ity
1 Instructions for Use
4 Set Screw
– Single-component pack
Consisting of:
– 1 Cap Screw
– 1 Straight pin
– 1 Straight pin
1 Plastic ring
2R30 Tube
Reference num­
ber
647H9=1
Reference num­
ber
647H9
506G3=M8x12-V
4D4
–
–
–
4X15