Fisher & Paykel DishDrawer DD60SA User Manual page 42

PROBLEM
Dishes did not dry
Excessive motor
noise
38
TROUBLESHOOTING
POSSIBLE CAUSE
Incorrect loading.
Dishes were left in the
drawer for several hours
after a wash.
Rinse aid depleted.
Rinse aid setting too
low.
Normal Eco program
used.
Items that require a
longer drying time,
e.g. plastic utensils and
containers
No water in the motor
area.
WHAT TO DO
Ensure the dishes are not nesting
together.
We recommend unloading the dishes
within a few hours after a wash program
has finished, as the small amount of
vapour left after the wash may -with
time- resettle on dishes as condensation.
Using rinse aid or increasing its setting
may also help reduce this problem.
Refill the rinse aid dispenser.
Increase the rinse aid setting.
Choose a standard wash program.
DD***C models only:
Set the wash program with Extra dry.
(only available on some wash programs).
This usually occurs on the first use or
when the dishwasher has not been used
for long periods of time. Pour 3 cups of
water into the drawer before running a
wash program.