Fisher & Paykel DishDrawer DD60SA User Manual page 39

PROBLEM POSSIBLE CAUSE
Wrong type of detergent
Foaming
used
Incorrect amount of
detergent.
Too much egg in the
wash load.
Rinse aid setting too
high.
Rinse aid dispenser plug
not closed properly.
Drain hose disconnected
Water leaking
from waste pipe.
Water inlet hose not
properly connected.
Other leaks.
Rinse aid dispenser plug
not closed properly.
TROUBLESHOOTING
WHAT TO DO
ONLY use detergents for Dishwashers.
See 'Adding detergent'.
See section 'Wash programs and detergent
quantities' or follow the detergent
manufacturer's instructions.
Increase the amount of detergent.
Decrease the rinse aid setting.
Ensure that the rinse aid dispenser plug
is closed tight, with its hand grip pointing
vertically. See section 'Using rinse aid'.
Reconnect the drain hose to the waste
pipe.
Ensure the inlet hose is connected
securely.
Turn water and power supplies to the
dishwasher off. Call Customer Care or
your Authorised Service Centre. See your
'Service and warranty' booklet for contact
details.
Ensure that the rinse aid dispenser plug
is closed tight, with its hand grip pointing
vertically. See section 'Using rinse aid'.
35