Total Control
Bottom Panel Description
The bottom panel of the MRX-5 Advanced Network System Controller displays the
following information:
1. Reset Button: Located at the bottom of the device and requires a stylus or
paper clip to press. Performs two (2) possible actions:
■ Single Tap: Power cycle the device.
■ Press-N-Hold: Press this button for 15 seconds to restore the
device to its factory settings. This action cannot be reversed and the
device REQUIRES re-programming with the Total Control software.
2. Mounting Plate: Slide the mounting plate up or down to remove it from
the device. Use the four (4) supplied mounting screws to mount the MRX-5
on a wall, ceiling, or any other convenient location.
2
4
Owner's Manual
1
MRX-5
Need help?
Do you have a question about the Total Control MRX-5 and is the answer not in the manual?