Install Your Switch; Safety Considerations For Installation - Extreme Networks ExtremeSwitching 5320 Series Hardware Installation Manual

Install Your Switch

Safety Considerations for Installation

What You Will Need for the Installation
Mount the Device
Connect Network Interface Cables
Install Optional Components
Turn on the Switch
Before You Begin
Before you attempt to install or remove an Extreme Networks switch, read the precautions in
Considerations for Installation
About This Task
Extreme Networks switches fit into standard 19-inch equipment racks. A two-post rack-mounting kit is
provided with the switch.
The installation process includes the following tasks:
Procedure
1. Prepare to install the switch.
See What You Will Need for the Installation
2. Mount the switch, or install the switch in the rack.
See Mount the Device
3. Connect network interface cables.
See Connect Network Interface Cables
4. Install optional components: optical transceivers and cables.
See the instructions in
5. Power up the switch.
See Turn on the Switch
6. Perform initial network connection and configuration.
See Activate and Verify the Switch
Safety Considerations for Installation
Read the information in this chapter thoroughly before you attempt to install or remove an Extreme
Networks switch.
54 ExtremeSwitching 5320 Series Hardware Installation Guide
on page 54
on page 55
on page 55
on page 60
on page 60
on page 61
on page 54.
on page 55.
on page 55.
on page 60.
Install Optional Components
on page 61.
on page 64.
on page 60.
Safety